User Manual

Six-servo Robot Arm DAGU Hi-Tech Electronic Co., LTD www.arexx.com.cn
following five parts:
1,Connecting the port and settings.
2, Access control.
3, Operation options.
4,The directive.
5, Adjust the speed and spacing of regulation
6, Commands input by hand
2.2, Port connections and settings.
Here we fully introduce the five parts and how they operate from each
other.
2.2.1, The port connector and settings.
Figure No.5
Com1 is a normal port. For most desktops, connect "com1" it will be
successfully linked. If it fails, try to use com2, after click the connect button,
9