User Manual

Six-servo Robot Arm DAGU Hi-Tech Electronic Co., LTD www.arexx.com.cn
2.2.2, Access Control
32 servo controllers can control 32 servo motors. As shown in Figure
No.6, access control bar has 32 numbers, this 32 numbers showing in the
interface is corresponding to the board of the 32 pin position, and each
number below, and there is a corresponding value. This amount changes
between 500 and 2500. 1500 is the numerical zero state. Below each value,
there is a corresponding numerical value; below the value there is still a
reselected box. When select the box, the value is effective, inserted the plug
if the control board is also in accordance with this order on the motherboard,
this control on the software interface code is also 1-6. When the double
power connects, there is no problem for the communication, to pull any 1-6
numerical drags, the robot will move up. If the six servo motors, in numerical
drag can be fixed up, at this time of the communication is OK.
11