Datasheet
12 Rohde & Schwarz | R&S®HMO Compact Series
R&S®HMO Compact Series
(4-channel mixed signal oscilloscopes)
R&S®HMO724: 70 MHz
R&S®HMO1024: 100 MHz
R&S®HMO1524: 150 MHz
R&S®HMO2024: 200 MHz
from firmware version 4.527
Display
Screen size / type 16,5 cm (6,5“) VGA Color Display
Resolution (L x W) 640 x 480 Pixel
Backlight 400 cd/m
2
(LED)
Display range in horizontal direction
without menu bar 12 Div (600 Pixel)
with menu bar 10 Div (500 Pixel)
Display range in vertical direction 8 Div (400 Pixel)
with Virtual Screen usage 20 Div
Color depth 256 colors
Trace display pseudo-color, inverse brightness
Levels of trace brightness 32
Button brightness light, dark
Vertical System
DSO Mode CH1, CH2, CH3, CH4
MSO Mode CH1, CH2, CH3|POD, CH4
Analog Channels
Y-bandwidth (-3 dB)
(1 mV, 2 mV)/Div
20 MHz (R&S®HMO724, R&S®HMO1024)
100 MHz (R&S®HMO1524,
R&S®HMO2024)
(5 mV to 10 V)/Div
70 MHz (R&S®HMO724)
100 MHz (R&S®HMO1024)
150 MHz (R&S®HMO1524)
200 MHz (R&S®HMO2024)
Lower AC bandwidth 2 Hz
Bandwidth limitation (switchable) about 20 MHz
Rise time (computed)
R&S®HMO724 <5 ns
R&S®HMO1024 <3.5 ns
R&S®HMO1524 <2.4 ns
R&S®HMO2024 <1.75 ns
DC gain accuracy 2% of full scale
Input sensitivity range
all analog channels 1 mV/Div to 10 V/Div
coarse stepping 13 calibrated steps, 1-2-5 sequence
variable stepping freely between calibrated steps
Impedance
1 MΩ II 14 pF ±2 pF
(50Ω switchable: R&S®HMO1524,
R&S®HMO2024)
Coupling DC, AC, GND
Max. input voltage
1 MΩ
200 V
p
(derates at 20 db/decade to 5 V
rms
above 100 kHz)
50Ω (R&S®HMO1524,
R&S®HMO2024)
5 V
rms
Position range ±10 Div (from center of screen)
Offset control (R&S®HMO1524, R&S®HMO2024 only)
1 mV/Div, 2 mV/Div ±0.2 V - 10 Div x sensitivity
5 mV/Div to 50 mV/Div ±1.0 V - 10 Div x sensitivity
100 mV/Div ±2.5 V - 10 Div x sensitivity
200 mV/Div to 2V/Div ±40 V - 10 Div x sensitivity
5 V/Div to 10 V/Div ±100 V - 10 Div x sensitivity
XY/XYZ mode selectively all analog channels
Inversion selectively all analog channels
Logic Channels (with logic probe R&S®HO3508)
Thresholds TTL, CMOS, ECL, user-definied (-2 V to
+8 V)
Impedance 100 kΩ || 4 pF
Coupling DC
Max. input voltage 40 V
p
Trigger System
Trigger Mode
Auto Triggers automatically also without any
specific trigger event
Normal Triggers only on specific trigger events
Single Triggers once on a trigger event
Trigger indicator Screen and panel (LED)
Trigger sensitivity
up to 5mV/Div 1.5 Div
from 5mV/Div 0.8 Div
Trigger level setting
with auto level
Linking peak value and trigger level,
adjustable between peak values of a
signal
without auto level ±10 Div (from center of screen)
Trigger coupling
AC
5 Hz to 100 MHz (HMO724)
5 Hz to 150 MHz (HMO1024)
5 Hz to 200 MHz (HMO1524)
5 Hz to 250 MHz (HMO2024)
DC
DC to 100 MHz (HMO724)
DC to 150 MHz (HMO1024)
DC to 200 MHz (HMO1524)
DC to 250 MHz (HMO2024)
HF
30 kHz to 100 MHz (HMO724)
30 kHz to 150 MHz (HMO1024)
30 kHz to 200 MHz (HMO1524)
30 kHz to 250 MHz (HMO2024)
selectable filters
LF
DC to 5 kHz, selectable in DC and auto
level mode
Low-pass
(noise rejection)
min. level: 1.5 Div (> 5 mV/Div)
selectable with AC, DC
External Trigger Input (BNC)
Impedance 1 MΩ || 14 pF ±2 pF
Trigger level 0.3 V
pp
to 10 V
pp
Max. input voltage 100 V
p
Coupling DC, AC
Trigger Types
Edge
Direction rising, falling, both
Switchable filters LF, noise rejection
Sources all analog and digital channels, AC line,
external (AC, DC)
Edge A/B
Direction rising, falling, both
Frequency range DC to 70/100/150/200 MHz
Min. signal amplitude 0.8 Div
Trigger level range (seperately
adjustable with different sources)
±10 Div (from center of screen)
Trigger settings for state B
time based 32 ns to 17 s, resolution min. 8 ns
event based 1 to 2
16
events