Use and Care Manual
Service
>
Have
your powertool
serviced by a
qualified
repair
person
using only
identical
replacement
parts.
This will ensure
that the safety of
the
power
tool
is maintained.
>
Use auxiliary
handle(s),
if
supplied
with
the tool. Loss of
control can
cause
personal
injury.
>
Hold
power
tool by
insulated
gripping
surfaces,
when
performing
an
operation
where the cutting accessory
may contact
hidden
wiring.
Cutting accessory
contacting a "live"
wire
may exposed metal
parts
of
the
power
tool
"live"
and could
give
the operator an
electric shock.
>
Hold
power
tool by insulated
gripping
surfaces,
when
performing
an
operation
where the
fastener may contact
hidden wiring.
Fasteners
contacting
a
"live"
wire may make exposed
metal
parts
of the
power
tool
"live"
and could
give
the operator an electric
shock.
Personal safety
>
Tampering
with or modification of
the tool is not
permitted.
>
Keep the
grips
dry, clean and
free from oil and
grease.
>
lmprove
the blood circulation
in
your
fingers by
relaxing
your
hands
and exercising
your
fingers during
breaks between
working.
>
Do not look directly
into the light source
(LEDs)
integrated
in the
dril/driver
and do
not
direct
the light at other
persons'
faces.
This
presents
a risk of dazzling
or eye damage.
>
Avoid touching
rotating
parts.
Switch
the
power
tool on only
after
bringing
it into
position
at the workpiece.
Touching
rotating
parts,
especially
rotating drill bits or other accessory
tools,
may lead to injury.
>
Wear
protective gloves.
The dril/driver
may
get
hot during use. There
is
a
risk of injury
(cutting
or
burning) if the accessory
tool is touched while
changing
it.
>
Activate the safety
lock
(forward/reverse
selector switch
in the middle
position)
when changing accessory
tools or batteries and before storage
or transportation of
the
power
tool.
>
The
power
tool
is not intended for use by debilitated
persons
who
have received
no
special
training.
Keep the
power
tool out of
reach
of children.
>
Dust from
materials, such as
paint
containing
lead, some wood species,
concrete
/
masonry
/
stone
containing silica, and
minerals as well as
metal, may be
harmful.
Contact
with or
inhalation of the dust may cause
allergic
reactions and/or
respiratory
or
other diseases to the operator