Warranty

HP-35A, 35-TON HYDRAULIC PRESS
331431
JET’s Hydraulic Shop Press line consists of a 5, 15 and 35 ton hydraulically
powered H frame press. Each machine is built using heavy steel plate that is electro
welded together, and comes standard with industrial grade hydraulics. These
machines are for the serious fabrication and machine shop owner who demands
only the best quality from his operation.
*HP-15A Shown in Image
For pressing, bending and straightening operations
Easy-to-use, hand-operated with pressure gauge for direct pressure readings
Tables raise and lower easily with use of hand crank on the 15- and 35on models
Side frames are open for inserting long material
Fast setup ram extension screw
Ram moves laterally for added versatility (15- and 35-ton models)
Two bed plates and pump handles
Straightness testing support uses centers or v-blocks on the 15 and 35 Ton
models
FEATURES
JET RED ASSURANCE 2-YEAR WARRANTY
JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United
States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you
in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center in your area
call 1-800-274-6848.