Specification

Thermo-ply Cuts Easily
Thermo-ply is Cost Effective
Thermo-ply is Lightweight
Multi-Family Use
 Less work site damage means lower replacement costs.
 Size versatility means less scrap, less waste and less site clean up.
 Available up to 12’ lengths.
 Easy installation saves time and labor.
A knife, router or
saw can be used to
cut or trim Thermo-
ply. And workers
can kneel or walk
on it without caus-
ing damage.
Excellent for use behind vinyl siding
when a reflective surface is not re-
quired or desired.
Outstanding curb appeal gives your
project a crisp, clean attractive ap-
pearance during framing of construc-
tion.
 Can be used as a draft stop.*
 Can be used as part of a 1 hour fire rated wall
assembly.*
 Red and blue structural grades are alterna-
tives for exterior and interior shear load design.
(See Shear Value tables for calculation values
in Evaluation reports.)
*Refer to Individual Evaluation reports (ICC-ES, BOCA,
ICBO, SBCCI) for code compliance. Individual jurisdic-
tions and municipalities may vary. Check with your local
building officials for approval and acceptance.
Thermo-ply can be handled
easily by one worker. It only
weighs 13 lbs. per sheet. Its
combined strength and light
weight allow entire walls to
be constructed and lifted
into place.
Thermo-ply is Available with White Poly Facing
Recyclability