SDS

Biological limit values
ACGIH Biological Exposure Indices
Value
Sampling TimeDeterminant SpecimenComponents
50 mg/l Acetone Urine
*
2-Propanone (CAS 67-64-1)
80 mg/l 1,2-Cyclohexan
ediol,
with
hydrolysis
Urine
*
Cyclohexanone (CAS
108-94-1)
8 mg/l Cyclohexanol,
with hydrolysis
Urine
*
2 mg/l Tetrahydrofura
n
Urine
*
Furan, Tetrahydro- (CAS
109-99-9)
2 mg/l MEK Urine
*
Methyl ethyl ketone (CAS
78-93-3)
* - For sampling details, please see the source document.
Exposure guidelines
US - California OELs: Skin designation
Cyclohexanone (CAS 108-94-1) Can be absorbed through the skin.
US - Minnesota Haz Subs: Skin designation applies
Cyclohexanone (CAS 108-94-1) Skin designation applies.
US - Tennessee OELs: Skin designation
Cyclohexanone (CAS 108-94-1) Can be absorbed through the skin.
US ACGIH Threshold Limit Values: Skin designation
Cyclohexanone (CAS 108-94-1) Can be absorbed through the skin.
Furan, Tetrahydro- (CAS 109-99-9) Can be absorbed through the skin.
US. NIOSH: Pocket Guide to Chemical Hazards
Cyclohexanone (CAS 108-94-1) Can be absorbed through the skin.
Appropriate engineering
controls
Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 air
changes per hour) should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency
shower must be available when handling this product.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear appropriate chemical resistant gloves.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
If engineering controls do not maintain airborne concentrations below recommended exposure
limits (where applicable) or to an acceptable level (in countries where exposure limits have not
been established), an approved respirator must be worn.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using, do not eat, drink or smoke. Wash hands after handling and before eating.
9. Physical and chemical properties
Appearance
Opaque.or Translucent.
Physical state
Liquid.
Form
Liquid.
Color
Gray or Clear.
Odor
Solvent.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
151 °F (66.11 °C)
Flash point
14.0 - 23.0 °F (-10.0 - -5.0 °C)
Evaporation rate
5.5 - 8
Oatey PVC Heavy Duty Clear or Gray Cement SDS US
920700 Version #: 02 Revision date: 15-December-2014 Issue date: 04-August-2014
5 / 10