Specification

ManualsBrandsUnbranded ManualsPipe Cement, Primer & Cleaner16 oz. ABS Cement in Black

Page: 1 of 5

MATERIAL SAFETY DATA SHEET

MSDS Number:

1300E

Section 1 PRODUCT AND COMPANY IDENTIFICATION

Trade Name: OATEY ABS MEDIUM SPECIAL MILKY CLEAR or BLACK CEMENT

Product Nos.: Special Milky - 30922, 30923, 30924, 30929 Black - 30889, 30892, 30902,

30915, 30999, 32204, 32205, 32206, 32207

Product Use: Cement for ABS Plastic Pipe

Formula: ABS Resin in Solvent Solution

Synonyms: ABS Plastic Pipe Cement

Firm Name &

Address:

Oatey Company 4700 West 160th Street, Cleveland, Ohio 44135

www.oatey.com

Firm Phone No: (216) 267-7100

Emergency Phone

Nos.:

For Emergency First Aid call 1-877-740-5015. For chemical transportation

emergencies ONLY, call Chemtrec at 1-800-424-9300. Outside the U.S. 1-

703-527-3887.

Prepared by: Technical Department

Preparation Date: 11/01/2009

Section 2 HAZARDS IDENTIFICATION

Emergency Overview:

Black or White

liquid with sharp, penetrating odor. Extremely flammable liquid and vapor. Vapors may cause

flash fire. May cause eye and skin irritation. Inhalation of vapors or mist may cause

respiratory irritation and central nervous system effects. Swallowing may cause irritation,

nausea, vomiting, diarrhea and kidney or liver disorders. Aspiration hazard. May be fatal if

swallowed. Symptoms may be delayed.

Section 3 COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENTS: %wt/wt : CAS NUMBER: ACGIH TLV TWA: OSHA PEL TWA OTHER:

Methyl Ethyl Ketone 40 – 60% 78-93-3 200 ppm 200 ppm None

300 ppm

Acetone 10 - 20% 67-64-1 500 ppm 1000 ppm None

750 ppm STEL

ABS Resin 30 – 40% 9003-56-9 None None None

(Non-hazardous) Established Established

OSHA Hazard Classification: Flammable, irritant, organ effects

Section 4 FIRST AID MEASURES

Skin: Remove contaminated clothing immediately. Wash all exposed areas with soap and

water. Get medical attention if irritation develops. Remove dried cement with

Oatey Plumber's Hand Cleaner or baby oil.

Eyes: If material gets into eyes or if fumes cause irritation, immediately flush eyes

with plenty of water until chemical is removed. If irritation persists, get

medical attention immediately.

Inhalation: If symptoms of exposure develop, remove to fresh air. If breathing becomes

difficult, administer oxygen. Administer artificial respiration if breathing

has stopped. Seek immediate medical attention.

Ingestion:

DO NOT INDUCE VOMITING. Rinse mouth with water. Never give anything by mouth to

a person who is unconscious or drowsy. Get immediate medical attention by

calling a Poison Control Center, or hospital emergency room. If medical advice

Summary of content (5 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET MSDS Number: 1300E Section 1 Trade Name: Product Nos.: PRODUCT AND COMPANY IDENTIFICATION OATEY ABS MEDIUM SPECIAL MILKY CLEAR or BLACK CEMENT Special Milky - 30922, 30923, 30924, 30929 Black - 30889, 30892, 30902, 30915, 30999, 32204, 32205, 32206, 32207 Cement for ABS Plastic Pipe ABS Resin in Solvent Solution ABS Plastic Pipe Cement Oatey Company 4700 West 160th Street, Cleveland, Ohio 44135 www.oatey.com (216) 267-7100 For Emergency First Aid call 1-877-740-5015.
PAGE 2
cannot be obtained, then take the person and product to the nearest medical emergency treatment center or hospital. Section 5 Flashpoint / Method: Flammability: Extinguishing Media: Special Fire Fighting Procedure: Unusual Fire And Explosion Hazards: Hazardous Decomposition Products: FIRE FIGHTING MEASURES 14 - 23 Degrees F. (-10 to -5 Degrees C) / CCCFP LEL = 1.8 % Volume, UEL = 11.8 % Volume Use dry chemical, CO2, or foam to extinguish fire. Cool fire exposed container with water.
PAGE 3
Vapor Pressure: Vapor Density: Volatile Components: Solubility In Water: pH: Specific Gravity: Evaporation Rate: Appearance: Odor: Will Dissolve In: Material Is: 145 mmHg @ 20 Degrees C (Air = 1) 2.5 60-70% Negligible Not applicable 0.89 +/- 0.02 @ 20 Degrees C (BUAC = 1) = 5.5 - 8.0 Yellow Sharp, penetrating odor Methyl Ethyl Ketone Liquid Section 10 STABILITY AND REACTIVITY Stability: Stable. Conditions To Avoid heat, sparks, flames and other sources of ignition.
PAGE 4
Methyl Ethyl Ketone: 96 hour LC50 for fish is greater than 100 mg/L. This product emits VOC’s (volatile organic compounds) in its use. Make sure that use of this product complies with local VOC emission regulations, where they exist. Maximum 325 g/L per SCAQMD Test Method 316A. VOC Information: VOC Level: Section 13 DISPOSAL CONSIDERATIONS Waste Disposal: Dispose in accordance with current local, state and federal regulations.
PAGE 5
NFPA and HMIS: NFPA Hazard Signal: HMIS Hazard Signal: Health: 2 Flammability: 3 Reactivity: 1 Special: None Health: 2* Flammability: 3 Reactivity: 1 PPE: G Disclaimer: The information herein has been compiled from sources believed to be reliable, up-to-date, and is accurate to the best of our knowledge. However, we cannot give any guarantees regarding information from other sources, and expressly does not make warranties, nor assumes any liability for its use.