SDS

Material Name: OATEY X-15 PVC ADHESIVE
____________________________________________________________
Page 5 of 9
Issue Date 05/13/2013 Revision 1.0000
Print Date: 5/28/2015
Personal Protective Equipment: Skin and Body
No additional protective equipment needed.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance:
Clear
Odor:
Ether-like
Physical State:
Liquid
pH:
NA
Vapor Pressure:
145 mmHg @ 20°C
Vapor Density:
2.5
Boiling Point:
151°F (66°C)
Melting Point:
NA
Solubility (H2O):
Negligible
Specific Gravity:
0.90 +/- 0.02 @ 20°C
Evaporation Rate:
(BUAC = 1) = 5.5 - 8.0
VOC:
<510 g/L (SCAQMD)
Octanol/H2O Coeff.:
ND
Flash Point:
14-23°F (-10 to -5°C)
Flash Point Method:
CCCFP
Upper Flammability Limit
(UFL):
11.8
Lower Flammability Limit
(LFL):
1.8
Burning Rate:
ND
Auto Ignition:
ND
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
This is a stable material.
Hazardous Reaction Potential
Will not occur.
Conditions to Avoid
Avoid heat, sparks, flames and other sources of ignition.
Incompatible Products
Oxidizing agents, alkalis, amines, ammonia, acids, chlorine compounds, chlorinated inorganics (potassium,
calcium and sodium hypochlorite) and hydrogen peroxides. May attack plastic, resins and rubber.
Hazardous Decomposition Products
Combustion will produce toxic and irritating vapors including carbon monoxide, carbon dioxide and hydrogen
chloride.
* * * Section 11 - Toxicological Information * * *
Acute Toxicity
Component Analysis - LD50/LC50
Tetrahydrofuran (109-99-9)
Inhalation LC50 Rat 53.9 mg/L 4 h; Inhalation LC50 Rat 180 mg/L 1 h; Oral LD50 Rat 1650 mg/kg
Acetone (67-64-1)
Oral LD50 Rat 5800 mg/kg
Potential Health Effects: Skin Corrosion Property/Stimulativeness
May cause irritation with redness, itching and pain.
Potential Health Effects: Eye Critical Damage/ Stimulativeness
Vapors may cause irritation. Direct contact may cause irritation with redness, stinging and tearing of the eyes.
May cause eye damage.