Use and Care Manual

Part 2: Mechanical installation

NAME QTY.

Step 16: Install Lead Screw Assembly (X Axis)

NO.

Operation

Steps

Prepare

materials

BEFORE

AFTER

CODE

Tools

Check

Remind

Lead Screw Assembly (from Step15)

Allen wrench (2mm)

Insert the Lead Screw assembly to theX-Z Axis Assembly,

then rotate the Lead Screw into the nut inside of the

X-Z Axis assembly.

Keep to rotate the Lead Screw, until insert to the bule

coupling, tighten the small screws in the coupling.

Make sure the distance between the Phenolic resin

plate-R and Phenolic resin plate-B for 31.5mm.

Lead

Screw

Assembly

31.5mm