Instructions / Assembly

Step 5
Make sure all parts are connected and securely locked into position.
Your chair is ready for use.
Install the leg into the chair by putting a Plastic Washer Ring(e) (improves
tightness and security of leg)on the threaded stem.
The use of plastic washer rings are OPTIONAL and is especially useful to help
alleviate slight wobbliness.
Then insert the threaded stem into the threaded hole at each corner of the
bottom of the chair.
Tighten by turning leg clockwise.
Repeat the same procedure to install the other three remaining legs.
Step 4
Use Washer Ring to
achieve stability
Page 5 OF 6