Measurement Guide

WATERFALL VALANCE
HARDWARE
HANGING INSTRUCTIONS
Detachable curtain rod and
curtain rod brackets.
1. Separate the curtain rod. Hold your first
valance with the pattern facing you. Each
valance contains a header and a rod pocket on
both the left, and right side. Insert the left
curtain rod into the bottom of the left rod
pocket and thread the valance through.
2. Repeat Step 1 with the second valance.
3. Using the same rod, insert into the rod
pocket located on the right side of valance 1,
entering through the top. Thread completely
through. Valance 1 should now be positioned
behind valance 2.
4. Hold the third valance with the pattern
facing you. Using the right curtain rod, insert
the rod into the right rod pocket of the
valance, entering through the bottom.
5. Returning to valance 2, take the side left
hanging, and thread onto the right curtain
rod from the bottom of the right rod pocket.
6. Set valance and rod onto window. Once
the rod is set, expand the headers to connect
each valance and eliminate the empty spaces.
From here, evenly adjust all valances, and fix
any uneven pleats.
6