Caution: You must read this before you proceed.
Label Picture G H I Description Allen Key Bolt with Washer (M6x16MM) Bolt with Washer (M6x30MM) Before Beginning Assembly: Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place Basket Seat(A) on the ground, as shown in picture above.
Step 2 Attach two Front Legs(C1) to the Basket Seat(A) using Bolts with Washers(H) with Allen Key(G) as shown in the picture above. Loosely tighten the Bolts. Step3 Turn the Basket Seat(A) around as shown in picture. Attach Back Legs(C2) to Basket Seat(A) using Bolts with Washers(H) with Allen Key(G) as shown in picture above. Loosely tighten the Bolts. Step 4 Stand the Basket Seat(A) upright.
Step 5 Check for stability and then tighten all Bolts at all joints. Note: DO NOT fully tighten a Bolt in one go and then move on to the next. Rather; in a sequential manner, gradually tighten each Bolt until all Bolts are evenly secured. This methodology will ensure maximum evenness once all Bolts are fully tightened. Step 6 Place the Cushion(F) and Pillow(E) on the Basket. Your Basket Chair is ready for use.
