Caution : You must read this before you proceed Sofa - Two Seater Label Picture Description QTY A Sofa Backrest Panel 1 B Right Armrest 1 C Left Armrest 1 D Seat Panel 1 E Pillow 2 F Cushion 1 Label Picture Description QTY ① Allen Key 1 ② Bolt with Flat Washer(M6x45MM) 12
Before Beginning Assembly: Overview Pillow(E) Left Armrest(C) Cushion(E) Sofa Backrest Panel(A) Right Armrest(B) Seat Panel(D) This Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place Left Armrest(C), on a clean non-marring surface.
Step 2 Attach seat panel(D) to Left Armrest(C) using Bolt with Flat Washer(②) and Allen Key(①). DO NOT FULLY TIGHTEN BOLTS at this step. Step 3 Attach Backrest Panel(A) to Seat Panel(D) and Left Armrest(C) using Bolts with Flat Washer(②) and Allen Key(①) at the five mounting points shown in the picture. Secure Bolts up to 80% tighness. DO NOT FULLY TIGHTEN BOLTs. Step 4 Attach the Right Armrest(B) to the Loveseat using Bolt with Flat Washer(②) and Allen Key(①).
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
Caution : You must read this before you proceed COFFEE TABLE Label Picture Description QTY A Glass 1 B Woven Table Top (without glass) 1 C1 Table Leg (Labelled 'a') 2 C2 Table Leg (Labelled 'b') 2 D Shelf 1 Label Picture Description QTY ① Allen Key 1 ② Bolt with Flat Washer 13
Before Beginning Assembly: Overview Glass (A) Table Leg 'a' (C1) Woven Table Top (B) Table Leg 'b' (C2) Shelf (D) This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Attach Table Leg(C1) to the mounting points on the Table Top using Bolt with Flat Washer(②) and Allen Key(①). Tighten Bolts, up to 80% tightness. DO NOT FULLY TIGHTEN BOLTs. Step 3 C1 C2 Repeat the same assembly process for the remaining three Table Legs. REMINDER : Secure up to 80% tightness on all legs. NOTE: Legs(C1) & Legs(C2) should be on a diagonal line as shown in the picture. Step 4 Then place the table with assembled legs to its side.
Step 5 Turn the table right side up onto a flat horizontal level. Assess levelness. Then, fully tighten all bolts of above steps. Step 6 Turn the table right side up. Carefully place the Glass(A) onto the Table Top. Your table is ready for use. Caution: The Table and its Parts are heavy. A second Adult must assist whenever lifting or moving them.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
