Installation Guide

diy LONG PLANK
wALL PLANKiNG KiTS
Installation Guide
If you have questions during installation or about your purchase please call 949-244-5123. DO NOT return to retailer.
Remove the strapping from plank kit.
Layout on the oor to get an idea for how you
want them to appear on the wall and where your
cuts will be made.
Distribute different colored planks evenly and
not next to one another for the best look.
Suggested tools for your project:
-Measuring tape
-Pencil
-Eye/Hearing protection
-Brad nail gun to secure each plank to the wall. Use the
smallest brad nails feasible
-Handsaw, chop saw, jig saw, or circular saw to cut the
planks to length
-Construction adhesive in addition to nailing is
recommended. You can use the caulking gun style.
These planks are carefully
made to reduce (as much
as possible) any gaps be-
tween planks.
However, you may need
to darken the wall surface
to prevent any shadow-
ing should there be any
gaps or holes. We suggest
painting the wall a darker
color, but this is not neces-
sary in most cases.
Mark the studs of the wall
as your rst step.
You’ll want to make sure
to secure the planks to the
studs whenever possible.
e Vintage Wood Floor Company VintageWoodFloors.com
e Antique Barrel Collection AntiqueBarrelCollection.com
714-557-9655
[e-mail]