User manual
57
Problem Possible cause Solution
Espresso is too
cold.
The cups were not
pre-heated.
Rinse the cups with
hot water.
Indicator lamp
does not light up
during the brewing
process.
Wait until the indicator
lamp lights up.
Coffee crema
is slightly disco-
loured (coffee
runs out fast).
The coffee grounds
are too coarse or are
not evenly spread.
Use the supplied
tamper.
Too little coffee
grounds in the lter
insert.
Fill coffee grounds only
to MAX marking in the
lter insert.
Coffee crema is
dark discoloured
(coffee runs out
slowly).
The coffee grounds
are too ne or com-
pressed too much.
Loosen the coffee
grounds. Spread it
evenly and only slightly
compress with the
tamper.
Too much coffee
grounds in the lter
insert.
Use less coffee
grounds. Observe the
MAX marking in the
lter insert.
No crema on
the espresso.
The espresso
grounds are not
suitable.
Change the brand, if
necessary.
The milk does
not froth.
The milk is not suit-
able.
Use milk with at least
3.5 % fat content.
The milk is not cold
enough.
Use refrigerated milk.
The steam nozzle is
dirty.
Clean the steam
nozzle as instructed.
The appli-
ance turns off
automatically.
This is not a
malfunction of the
appliance.
In order to comply
with the Ecodesign
Directive (2009/125/
EC), the appliance
turns off automati-
cally after max. 40
minutes after the
brewing process has
nished.
Technical Data
Model: .............................................................................ES 3584
Power supply: ........................................................ 230 V~, 50 Hz
Power consumption: .........................................................1050 W
Capacity: ..........................................................................1.5 Liter
Protection class: ........................................................................... I
Pressure:..............................................................................15 bar
Net weight: ..............................................................approx. 3.1 kg
The right to make technical and design modications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the “Wheelie Bin” Symbol
Take care of our environment, do not dispose of electrical appli-
ances via the household waste.
Dispose of obsolete or defective electrical appliances via
municipal collection points.
Please help to avoid potential environmental and health
impacts through improper waste disposal.
You contribute to recycling and other forms of utilization of old
electric and electronic appliances.
Your municipality provides you with information about collecting
points.