Instructions / Assembly

THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR
USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE
CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT,
INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT
PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
19/32 IN. x 2 FT. x 4 FT. TONGUE AND GROOVE
ATTIC DECKING INSTALLATION
©2018 Universal Forest Products, Inc. All rights reserved.
2801 E. Beltline NE, Grand Rapids, MI 49525 800.598.9663 (WOOD) 10112_8/18
UFPI.com
Install (3) 8d nails (2-1/2" x 0.31) in
center of panel. Space nails 12" on
center with 3/8" between edge of
decking and nails.
Use (6) 8d nails (2-1/2" x 0.31) at 6"
on center along each 2' edge of
attic decking.
19/32 IN. x 2 FT. x 4 FT. TONGUE AND GROOVE ATTIC DECKING FASTENING REQUIREMENTS
4'
2'
Offset nails
3/8" from
edge.
1-1/2'
Trusses or joists Truss or joist