Manualshelf

Installation Guide

ManualsBrandsUnbranded ManualsBuilding materials3/4 in. x 4-1/2 in. x 8 ft. Hardwood Stained Cherry Crown Moulding
12345678910
How to Cut Piece # 2:
(C) Place crown moulding (#2) ceiling side down in mitre box. Set the mitre box at 45° to the right. Keep scrap
moulding to the right of the blade and make cut.
Note: The secret to cutting crown moulding is to make your first cut slightly too long. Then trim the piece as needed
until it fits tightly. This may require several trim cuts.
How to Cope Crown Moulding (For Inside Corners)
To cope Crown Moulding for inside corners, you will need a mitre saw, a coping saw, a mitre box, a pencil and safety
goggles.