SDS
Page 2
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
CAS Number
Weight %
Trade Secret
Asphalt
8052-42-4
40-60
*
Kaolin
1332-58-7
10-20
*
Polymer Blend
Proprietary
0-15
*
*The exact percentage of composition has been withheld as a trade secret.
4. FIRST AID MEASURES
Description of Necessary First-Aid Measures
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a
physician.
Skin Contact Wash off immediately with soap and plenty of water. In the case of skin irritation or allergic
reactions, see a physician.
Inhalation Move to fresh air. If symptoms persist, call a physician.
Ingestion Drink plenty of water. Do NOT induce vomiting. Never give anything by mouth to an
unconscious person. Consult a physician if necessary.
Most Important Symptoms/Effects, Acute and Delayed
Most Important Symptoms/Effects No information available
Indication of Immediate Medical Attention and Special Treatment Needed, If Necessary
Notes to Physician Treat Symptomatically. May cause sensitization by skin contact.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Carbon Dioxide (CO
2
). Dry Chemical. Foam. Water Fog.
Unsuitable Extinguishing Media CAUTION: Use of water spray when fighting fire may be inefficient.
Specific Hazards Arising from the Chemical
No information available
Explosion Data
Sensitivity to Mechanical Impact None
Sensitivity to Static Discharge None
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure- demand MSHA/NIOSH (approved or equivalent) and full protective
gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures
Personal Precautions: Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Use personal
protective equipment.
Environmental Precautions
Environmental Precautions: See Section 12 for additional Ecological Information
Methods and Materials for Containment and Cleaning Up
Methods for Containment: Prevent further leakage or spillage if safe to do so.
Methods for Cleaning Up: Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labeled
containers. Clean contaminated surface thoroughly.