Installation Guide

Table Of Contents

1. Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some

wash-er-fluid is advisable. Remember to wipe it dry.

2. Remember to rinse the sink after using any cleaning agent and wipe dry. If any

mineral deposits are on the sink, clean it up as soon as possible.

3. Use a scrubbing pad to properly remove rust, mildew or scratches. Please wipe in the

direction of the finish of the sink.

4. Rub it lightly with a soft towel in the direction of grain lines.

5. Keep the sink dry after you use it. Because any standing water can cause a buildup

of mineral deposit,which will become hard water stains.

DO NOT

1. Leave water spots, utensils or steel cool-ware in the sink for a long time, which

would become rust spots in your sink surface.

2. Leave cleaning agents or bleach sitting in your sink for a long period which

could cause the sink to discolor or damage the surface.

3. Use steel wool or scouring pad rubbing against the direction of the grain.

4. Leave rubber mats, cleaning pads, or sponges in the sink for a long time as this

could ruin the finish of your sink.

5. Cut things on the inside surface of the sink.

How to use the scouring pad correctly?

1. Choose a dry and clean non-scratch scrub pad.

2. Gently wipe follow the direction of the brush finish to remove the

rust from the sink.