Installation Guide

Table Of Contents

MAINTENANCE INSTRUCTIONS

FAQs

1. Why is there rust in my new kitchen sink?

Reasons:

1.1 Residual solder, oil, or something similar on the sink can lead to rust if not cleaned in

time.

1.2 Chemical cleaning agents, paints, sauces, cooking oil, etc. can produce mold sticking to

the surface after being left in the sink for a period of time.

Prevention and Treatments:

1.1 Install the sink after everything else is done, and clean your sink right after installation.

1.2 Clean your sink after every use.

1.3 Properly remove the rust and molds using a scouring pad

2. What will scratch or harm the sink?

Reasons:

1.1 Improper packaging can lead to scratches. Lordear will make every effort to

pack the sink well to avoid scratches. Accessories may also scratch the sink

during transportation.

1.2 Other sharp objects scratch the sink. Accessories may also scratch the sink

during transport.

Prevention and Treatments:

1.1 Minor scratch: You can use a sponge with toothpaste to polish it again and again.

1.2 Moderate scratch: Using a scouring pad to polish small areas.

1.3 Serious scratch: Use stainless steel polisher.

3. What cause the hard water stains?

Reasons:

Hard water stains are normal for sinks that have been in use for some time.

Prevention and Treatments:

1.1.Scouring powder can easily solve the problem.

1.2.Clean Daily. Use a soft towel to wipe the sink with warm water. Mixing in some

washer-fluid is advisable to remember to wipe it dry at last.