Installation Guide

Step 4：
Attach the mounting clip to the protruding prongs below the
sink edge. Make sure the hooked side of the mounting clip is facing
away from the sink.
Step 5：Apply Silicone or Plumber's Putty
Clean and dry the rim surface of the sink; turn the sink upside down and apply the
sealant(not included) underneath the sink rim.
www.lordear.com
3
Step 3：Cut the Countertop
Carefully cut the opening in the countertop according to the tracing line (Note: use
the saw suitable for cutting the material of your countertop)