Specification
FILL and SEAL
™
Expanding Foam Sealant
Ready-to-use expanding polyurethane foam sealant
United States | RESIDENTIAL
NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer
is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with
applicable laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies where Dow is represented. The claims made may not have been
approved for use in all countries. Dow assumes no obligation or liability for the information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless
otherwise expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
Dow Polyurethane Foam Insulation and Sealants
CAUTION: When cured, these products are combustible and will burn if exposed to open flame or sparks from high-energy sources. Do not expose to temperatures above 240ºF (116ºC). For more information, consult
(Material) Safety Data Sheets ((M)SDS) call Dow at 18665832583 or contact your local building inspector. In an emergency, call 19896364400 in the U.S. or 15193393711 in Canada. When air sealing build-
ings, ensure that combustion appliances, such as furnaces, water heaters, wood-burning stoves, gas stoves and gas dryers, are properly vented to the outside. See: http://www.epa.gov/iaq/homes/hip-ventilation.html.
FILL and SEAL
™
Expanding Foam Sealants contain isocyanate and a flammable blowing agent. Read all instructions and (M)SDS carefully before use . Eliminate all sources of ignition before use. Cover all skin. Wear
long sleeves, gloves, and goggles or safety glasses. Provide adequate ventilation or wear proper respiratory protection. Contents under pressure. Not to be used for filling closed cavities or voids such as between walls
and under tub surrounds.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold will not
develop in any specific system.
Printed in the U.S.A.
®TM
* Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow. Form No. 179 152070415 CDP
For Technical Information
1866583BLUE (2583)
For Sales Information
18002322436
dowbuildingsolutions.com
sprayfoamatdow.com
Features:
• Fills, seals and insulates gaps greater than 1 inch
• Ready-to-use (straw applicator)
• Forms a long-lasting weathertight and water-resistant
seal to minimize drafts
• Interior/exterior use
1
• Adheres to wood, metal, masonry, glass and most plastics
2
• Tack free in 15 minutes
3
; Trims in one hour
• Cures rigid
• Paintable, stainable and sandable
• Cream colored foam
• UL Classified
1
Skin of cured foam can discolor if exposed to natural light. Paint or coat foam for best results.
2
The product adheres best when the surfaces are clean and free of oil or chemicals.
3
70 5°F and 50 5%RH, 1 inch bead diameter, 6 inch length.Cure rate is dependent on temperature,
humidity, and size of foam bead.
FILL and SEAL
™
is a ready-to-use expanding polyurethane foam sealant that fills, seals and insulates gaps
greater than 1 inch. It can be used to fill gaps around the home on the interior or exterior. FILL and SEAL
™
Expanding Foam Sealant expands to take the shape of gaps, creating a long-lasting, airtight and water-resistant
seal to minimize drafts.
In the U.S.
The Dow Chemical Company
Dow Building Solutions
200 Larkin Center, 1605 Joseph Drive
Midland, MI 48674

