Instructions / Assembly

Assembly
1
Attaching long bolts
2
Attaching table legs
C
DD
B
AA
C
B
C
C
B
B
C
B
A
□ Place the table top (A) upside down on a flat, smooth surface.
□ Attach one nut (AA) onto each long bolt (C).
□ Screw one long bolt into each corner completely.
□ Fully tighten the bolt on the corner of the table top using wrench (DD).
□ Cover the long bolt (C) with one table leg (B) until the bolt
partially gets out of the table leg.
□ Please check each table leg if it fits well with/at each corner
of the table top.
3
Securing the table leg
4
Turning the table upright
DD
AA
CC
BB
B
B
B
B
3
□ Put washer (BB), lock washer (CC) and nut (AA) on each long bolt.
□ Fully tighten each nut using wrench (DD).