Specification

ManualsBrandsUnbranded ManualsBuilding materials1/2 in. x 4 ft. x 8 ft. R-1.2 Sound Board Sound Barrier Sheathing

--------------------------------------------------------------------------------------------------------------------------------

440 SoundBarrier® Architectural Specifications CSI Sections 06, 07, 09, 10

--------------------------------------------------------------------------------------------------------------------------------

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Section 06 00 00 Wood, Plastics and Composites.

B. Section 07 00 00 Thermal and Moisture Protection.

C. Section 09 00 00 Finishes

D. Section 10 00 00 Specialties

1.2 RELATED SECTIONS

A. Section 06 10 00 – Rough Carpentry: Installation and requirements for wood

substrates and structure.

B. Section 09 20 00 – Plaster and Gypsum Board: Installation and requirements for wall

assemblies.

C. Section 09 60 00 – Flooring: Installation and requirements for finish flooring.

1.3 REFERENCES

A. APA The Engineered Wood Association (APA): APA AFG-01 – Specification for field

gluing subfloors.

B. American Society for Testing and Materials (ASTM):

1. ASTM C 209 - Test Methods for Cellulosic Fiber Insulating Board.

2. ASTM C 518 - Standard Test Method for Steady-State Thermal Transmission

Properties by Means of the Heat Flow Meter Apparatus.

3. ASTM E 84 - Test Method for Surface Burning Characteristics of Building

Materials.

4. UL listed, File R16381.

5. Forest Stewardship Certification (FSC): CoC Cert no. 5682.

6. ICC-ES Report ESR-1374.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

Summary of content (4 pages)

PAGE 1
-------------------------------------------------------------------------------------------------------------------------------440 SoundBarrier® Architectural Specifications CSI Sections 06, 07, 09, 10 -------------------------------------------------------------------------------------------------------------------------------PART 1 GENERAL 1.1 SECTION INCLUDES A. Section 06 00 00 Wood, Plastics and Composites. B. Section 07 00 00 Thermal and Moisture Protection. C. Section 09 00 00 Finishes D.
PAGE 2
1.5 QUALITY ASSURANCE A. Manufacturer Qualifications: Minimum 10 years experience in producing sounddeadening boards. 1.6 DELIVERY, STORAGE, AND HANDLING A. Store products in manufacturer's unopened packaging with labels intact until ready for installation. B. Inspect the materials upon delivery to assure that specified products have been received. Report damaged material immediately to the delivering carrier and note such damage on the carrier's freight bill of lading. C.
PAGE 3
6. 7. 8. 9. 10. 11. a. Parallel: 450-700 psi (3,100-4,830 kPa). b. Transverse: 750-1000 psi (5.1171-6.894 kPa). Hardness (Janka Ball): 230 lbs (104 kg) tested in accordance with ASTM D 1037. Water Absorption by Volume: When tested in accordance with ASTM C 209: a. 2 hour immersion: 7 percent maximum. Expansion: 50 to 90 percent relative humidity, 0.25 percent in accordance with ASTM C 209. Thermal Resistance: When tested in accordance with ASTM C 209 per ASTM C 518: a. R-value: 1.
PAGE 4
E. Starting work by installer is acceptance of substrate and environmental conditions. 3.2 PREPARATION A. Follow manufacturer’s instructions by separating and allowing panels to be exposed to environmental temperature and humidity conditions for not less than 24 hours before start of installation. 3.3 INSTALLATION A. Install in accordance with manufacturer's instructions. B. Install only clean dry panels. Do not install wet panels. C.