Installation Guide

PART QTY PART QTY

PART QTY

PART QTY PART QTY

PART QTY

PART QTY PART QTY

PART QTY

STEP 1: Attach post (Part B) to triangle base (Part A) using screws and cap nuts (Part G). Tighten using allen wrench

(Part J). Repeat this step for both sides.

STEP 2: Attach posts (Part C) to the side frames assembled during step 1 using two screws (Part H) per post. Tighten

using allen wrench (Part J). HINT: Do not tighten screws until all three posts are attached.

STEP 3: Attach casters (Part D & E) or stationary "feet" (Part F) to the bottom side of display using open-ended wrench

(Part K). If using casters be sure to attach locking ones (Part E) on opposite ends of the same post. For reference, see

image below. HINT: Lay display sideways on floor for easy attachment.

ITEM #20584 - TRIANGLE BASE METAL GARMENT RACK

INSTRUCTIONS

STEP 1

STEP 2

STEP 3

PART E ON

OPPOSITE ENDS

OF THE SAME

POST.

DECEMBER 2019