Instructions / Assembly

STEP 1: ________________________________________________________________ _______________________

Lay Chair Side Left (G-L) on the holes facing up on the shipping Insert Chair Back (B) into mortises on Chair Side. Note that the bevel

box to protect the finish. Install Front Spindle (F) Turned faces the rear of the chair. Figure 2.

Spindles (H), and Back Spindles (E) as shown in Figure 1.

H F

FIG. 1 G-L E FIG. 2 B (Pre-drilled on bottom) Bevels

STEP 1:____________________________________________________ ____________________________________

Insert Headrest (C) into the mortise in the Chair Side. Ensure that Lay the Chair Seat (A) into the Chair Side (G-L). The seat must be

both the Headrest (C), all Spindles and Chair Back (B) are placed as shown in Figure 5 before the next step or the chair will

fully inserted into the mortises. Figure 3. need to be dis-assembled to insert the seat. Figure 4

FIG. 3 C FIG. 4 A