Nozzle Literature
Systemic nozzles provide
excellent spray distribution
through a wide angle,
flat spray pattern. These
nozzles are excellent at
reducing spray drift.
SYSTEMIC NOZZLES
OPEN BOOM
EXCELLENT VERY GOOD GOOD
Herbicides
Soil Incorporated
Pre-Emergence
Post-Emergence
Fungicides
Insecticides
Liquid Fertilizer
Drift
•
•
•
•
•
•
•
ORDER THE CORRECT CAPS,
GASKETS AND TIP STRAINERS
REMEMBER TO FILL
ALL THREE NOZZLES
on your turret to complete a variety
of applications.
SELECT THE DESIRED MAIN
SUCTION LINE FILTER
Visit our online nozzle selector tool: sites.toro.com/nozzleselector/#/
1
4
3
CHOOSE YOUR NOZZLE
AIC TeeJet® (Air Induction Flat Fan)
The AIC TeeJet® (Air Induction Flat Fan) nozzle is a good general
purpose nozzle that can be used for both contact and systemic
applications. The spray pattern is 110 degrees with tapered
edges similar to a standard flat fan. This nozzle produces coarse
air-filled droplets with a venturi air aspirator. The air-filled
drops reduce spray drift but provide good contact coverage. Air
Induction nozzles can be operated at higher spray pressures
without creating excessive spray drift. Distribution AIC nozzles
are best when used at pressures above 30 psi.
TurfJet Wide Angle Flat Spray
The TurfJet is a wide 130 degree angle nozzle with a tapered fan
pattern. The TurfJet is best suited for systemic applications
where distribution quality is the primary goal. The TurfJet
creates extra coarse droplets and provides good drift control.
Distribution quality is excellent at all pressures.
Air Induction Turbo TwinJet®
The Air Induction Turbo TwinJet® is an air induction style nozzle
with two separate 110 degree spray patterns. One spray pattern
is directed forward of vertical and the second pattern is directed
rear of vertical. This nozzle creates medium and coarse droplets
and is an excellent nozzle for contact applications where drift
control is needed. The two independent spray patterns improve
contact coverage by spraying the turf at two different angles.
XRC TeeJet® Flat Fan
The Standard XRC Flat Fan nozzle has a 110 degree tapered
spray pattern and produces medium and fine droplets. Because
of the smaller droplets the Standard XRC Flat Fan is best suited
for contact applications where drift control is not needed.
80 mesh 100-6992
50 mesh 100-8642
(Standard Equipment)
30 mesh 100-6991
Multi Pro
®
Spray Nozzle Selection Guide
Color Nozzle Toro Spray Capacity Flow Gallons Per Acre - 20" Nozzle Spacing Gallons per 1000 sq ft - 20" Nozzle Spacing
Code Options Part#
Pressure 1 Nozzle oz per 3 3.5 4 4.5 5 5.5 6 6.5 7 2.5 3 3.5 4 4.5 5 5.5 6
in PSI in GPM min mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph mph
AIC 120-0701 20 0.28 36 27.7 23.8 20.8 18.5 16.6 15.1 13.9 12.8 11.9 0.76 0.63 0.54 0.48 0.42 0.38 0.35 0.32
AI Turbo TwinJet** 120-0708 30 0.35 45 34.7 29.7 26.0 23.1 20.8 18.9 17.3 16.0 14.9 0.95 0.79 0.68 0.60 0.53 0.48 0.43 0.40
Red TurfJet** 95-9222 40 0.40 51 39.6 33.9 29.7 26.4 23.8 21.6 19.8 18.3 17.0 1.09 0.91 0.78 0.68 0.60 0.54 0.49 0.45
0.4 gpm* XRC 117-5834 50 0.45 58 44.6 38.2 33.4 29.7 26.7 24.3 22.3 20.6 19.1 1.22 1.02 0.87 0.77 0.68 0.61 0.56 0.51
60 0.49 63 48.5 41.6 36.4 32.3 29.1 26.5 24.3 22.4 20.8 1.33 1.11 0.95 0.83 0.74 0.67 0.61 0.56
Tip Strainer - 50 120-0699 70 0.53 68 52.5 45.0 39.4 35.0 31.5 28.6 26.2 24.2 22.5 1.44 1.20 1.03 0.90 0.80 0.72 0.66 0.60
AIC 120-0702 20 0.35 45 34.7 29.7 26.0 23.1 20.8 18.9 17.3 16.0 14.9 0.95 0.79 0.68 0.60 0.53 0.48 0.43 0.40
AI Turbo TwinJet** 120-0709 30 0.43 55 42.6 36.5 31.9 28.4 25.5 23.2 21.3 19.7 18.2 1.17 0.97 0.84 0.73 0.65 0.58 0.53 0.49
Brown TurfJet** 95-9223 40 0.50 64 49.5 42.4 37.1 33.0 29.7 27.0 24.8 22.9 21.2 1.36 1.13 0.97 0.85 0.76 0.68 0.62 0.57
0.5 gpm* XRC 117-5835 50 0.56 72 55.4 47.5 41.6 37.0 33.3 30.2 27.7 25.6 23.8 1.52 1.27 1.09 0.95 0.85 0.76 0.69 0.63
60 0.61 78 60.4 51.8 45.3 40.3 36.2 32.9 30.2 27.9 25.9 1.66 1.38 1.19 1.04 0.92 0.83 0.75 0.69
Tip Strainer - 50 120-0699 70 0.66 84 65.3 56.0 49.0 43.6 39.2 35.6 32.7 30.2 28.0 1.80 1.50 1.28 1.12 1.00 0.90 0.82 0.75
AIC 120-0703 20 0.42 54 41.6 35.6 31.2 27.7 25.0 22.7 20.8 19.2 17.8 1.14 0.95 0.82 0.71 0.63 0.57 0.52 0.48
AI Turbo TwinJet** 120-0710 30 0.52 67 51.5 44.1 38.6 34.3 30.9 28.1 25.7 23.8 22.1 1.41 1.18 1.01 0.88 0.79 0.71 0.64 0.59
Gray TurfJet** 95-9224 40 0.60 77 59.4 50.9 44.6 39.6 35.6 32.4 29.7 27.4 25.5 1.63 1.36 1.17 1.02 0.91 0.82 0.74 0.68
0.6 gpm* XRC 117-5836 50 0.67 86 66.3 56.9 49.8 44.2 39.8 36.2 33.2 30.6 28.4 1.82 1.52 1.30 1.14 1.01 0.91 0.83 0.76
60 0.73 93 72.3 62.0 54.2 48.2 43.4 39.4 36.1 33.4 31.0 1.99 1.65 1.42 1.24 1.10 0.99 0.90 0.83
Tip Strainer - 50 120-0699 70 0.79 101 78.2 67.0 58.7 52.1 46.9 42.7 39.1 36.1 33.5 2.15 1.79 1.53 1.34 1.19 1.07 0.98 0.90
AIC 120-0704 20 0.57 73 56.4 48.4 42.3 37.6 33.9 30.8 28.2 26.0 24.2 1.55 1.29 1.11 0.97 0.86 0.78 0.70 0.65
AI Turbo TwinJet 120-0711 30 0.69 88 68.3 58.6 51.2 45.5 41.0 37.3 34.2 31.5 29.3 1.88 1.56 1.34 1.17 1.04 0.94 0.85 0.78
White TurfJet** 95-9225 40 0.80 102 79.2 67.9 59.4 52.8 47.5 43.2 39.6 36.6 33.9 2.18 1.81 1.55 1.36 1.21 1.09 0.99 0.91
0.8 gpm* XRC 117-5837 50 0.89 114 88.1 75.5 66.1 58.7 52.9 48.1 44.1 40.7 37.8 2.42 2.02 1.73 1.51 1.34 1.21 1.10 1.01
60 0.98 125 97.0 83.2 72.8 64.7 58.2 52.9 48.5 44.8 41.6 2.67 2.22 1.90 1.67 1.48 1.33 1.21 1.11
Tip Strainer - 50 120-0699 70 1.06 136 104.9 90.0 78.7 70.0 63.0 57.2 52.5 48.4 45.0 2.88 2.40 2.06 1.80 1.60 1.44 1.31 1.20
AIC 120-0705 20 0.71 91 70.3 60.3 52.7 46.9 42.2 38.3 35.2 32.4 30.1 1.93 1.61 1.38 1.21 1.07 0.97 0.88 0.80
AI Turbo TwinJet 120-0712 30 0.87 111 86.1 73.8 64.6 57.4 51.7 47.0 43.1 39.8 36.9 2.37 1.97 1.69 1.48 1.31 1.18 1.08 0.99
Blue TurfJet** 95-9188 40 1.00 128 99.0 84.9 74.3 66.0 59.4 54.0 49.5 45.7 42.4 2.72 2.27 1.94 1.70 1.51 1.36 1.24 1.13
1.0 gpm* XRC 117-5838 50 1.12 143 110.9 95.0 83.2 73.9 66.5 60.5 55.4 51.2 47.5 3.05 2.54 2.18 1.90 1.69 1.52 1.38 1.27
60 1.22 156 120.8 103.5 90.6 80.5 72.5 65.9 60.4 55.7 51.8 3.32 2.77 2.37 2.07 1.84 1.66 1.51 1.38
Tip Strainer - 50 120-0699 70 1.32 169 130.7 112.0 98.0 87.1 78.4 71.3 65.3 60.3 56.0 3.59 2.99 2.56 2.24 1.99 1.80 1.63 1.50
AIC 120-0706 20 1.06 136 104.9 90.0 78.7 70.0 63.0 57.2 52.5 48.4 45.0 2.88 2.40 2.06 1.80 1.60 1.44 1.31 1.20
AI Turbo TwinJet 120-0713 30 1.30 166 128.7 110.3 96.5 85.8 77.2 70.2 64.4 59.4 55.2 3.54 2.95 2.53 2.21 1.96 1.77 1.61 1.47
Green TurfJet** 95-9226 40 1.50 192 148.5 127.3 111.4 99.0 89.1 81.0 74.3 68.5 63.6 4.08 3.40 2.91 2.55 2.27 2.04 1.85 1.70
1.5 gpm* XRC 117-5839 50 1.68 215 166.3 142.6 124.7 110.9 99.8 90.7 83.2 76.8 71.3 4.57 3.81 3.26 2.86 2.54 2.28 2.08 1.90
60 1.84 236 182.2 156.1 136.6 121.4 109.3 99.4 91.1 84.1 78.1 5.00 4.17 3.57 3.13 2.78 2.50 2.27 2.09
Tip Strainer - 50 120-0699 70 1.98 253 196.0 168.0 147.0 130.7 117.6 106.9 98.0 90.5 84.0 5.39 4.49 3.85 3.37 2.99 2.69 2.45 2.24
† Gaskets are included with the nozzles/caps.
Order if extra gaskets are required.
CONTACT SYSTEMIC DRIFT
PRODUCTS PRODUCTS CONTROL
AIC GOOD EXCELLENT EXCELLENT
AI Turbo TwinJet EXCELLENT GOOD GOOD
TurfJet POOR EXCELLENT EXCELLENT
XRC EXCELLENT GOOD POOR
Tip Strainer
Contact nozzles provide
excellent spray distribution
over a wide range of
pressures. These nozzles
allow for better coverage
at higher pressures.
Toro exclusive Air Induction
Turbo Twin Jet in the 0.8, 1.0
and 1.5 sizes.
CONTACT NOZZLES
ANY BOOM
EXCELLENT VERY GOOD GOOD
Herbicides
Soil Incorporated
Pre-Emergence
Post-Emergence
Fungicides
Insecticides
Liquid Fertilizer
Drift
•
•
•
•
•
•
•
•
Nozzle
Selection Guide
2
Description 80 mesh 50 mesh 30 mesh
Part Number 100-6992 100-8642 100-6991
Cap
Gasket
†
Tip Strainer
AIC Included 40998 120-0698 or 120-0699
AI Turbo TwinJet
(0.4, 0.5, 0.6)
120-8570 40998 120-0698 or 120-0699
AI Turbo TwinJet
(0.8, 1.0, 1.5)
121-5062 40998 120-0698 or 120-0699
TurfJet 95-9186 40998 120-0698 or 120-0699
XRC Included 40998 120-0698 or 120-0699