Data Sheet

2
Rev. 2/21
The Workman utility vehicle is manufactured
in Tomah, WI ISO 9002 Certified Plant.
Multi Pro
®
WM – 200-Gallon Sprayer Specifications
*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual Products offered for sale
may vary in use, design, requirements and safety features. Consult your local Toro Distributor. “Cushman” is a registered trademark of Ransomes.
WARNING
THE WORKMAN
®
IS AN OFF-HIGHWAY VEHICLE, AND IS
NOT DESIGNED, EQUIPPED, OR MANUFACTURED FOR
USE ON PUBLIC STREETS, ROADS OR HIGHWAYS.
OPEN BOOMS (STANDARD)
BOOM ASSEMBLY
18.5’ (5.6 m) three section, triangular truss style open booms. Optional 20.5’
(6.25 m) booms available.
BOOM ACTUATORS
Heavy Duty hydraulic lift actuators with nitro-steel plated shafts; 1-3/4” Bore
x 10.06” Stroke.
SPRAY NOZZLES
Eleven nozzle turrets, triple turret-mount, quick-disconnect with diaphragm
check valves. Twelve nozzle turrets with optional kit.
MULTI PRO WM ACCESSORIES
NOZZALERT™
Monitors flow at each individual nozzle position, alerting the operator to flow deviations caused by worn, broken, clogged, or missing nozzles.
PRO FOAM
TM
MARKING KIT
Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both.
PRO FOAM
1 gallon (3.8 L) bottle of Pro Foam Concentrate.
CLEANLOAD
TM
EDUCTOR KIT
This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry Incorporates a built-in bottle wash nozzle and
has an optional suction lance to pull in powdered or liquid products from their container. Stores within the width of the machine.
FRESH WATER RINSE KIT
Simplifies and automates the triple-rinse process, saving hours and hours of clean up time.
ELECTRIC HOSE REEL KIT
150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan.
PRO FOAM
TM
MARKING KIT
Foam dollops ensure accurate parallel path tracking. Select foam independently or both simultaneously.
ULTRA SONIC BOOM
TM
KIT
New sonar sensors automatically maintain proper spray height over undulating turf.
COVERED BOOM KIT
Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality.
AIR INDUCTION TURBO TWIN
JET NOZZLES
Exclusive to Toro in the 0.8 gpm (3.02 lpm), 1.0 gpm (3.79 lpm) and 1.5 gpm (5.68 lpm) sizes, for exceptional contact coverage.
CONTACT & SYSTEMIC NOZZLES
Select the right nozzle for your application by using the new Toro Nozzle Selector - available via Toro.com
SPRAYER SPECIFICATIONS
SOLUTION TANK
High-density, impact-resistant polyethylene with large 16” (41 cm) fill
opening, tapered bottom and sump with drain.
RATED CAPACITY
200 gallons (757 liters).
SPRAY PUMP
Hardi 364/10.0, 6-diaphragm positive displacement pump w/1” (2.5 cm) input
shaft; input speed 0~540 rpm; Flow rate 45 gpm (170.3 lpm) @ 40 psi (540 rpm).
AGITATOR
4, side- mounted jet agitation nozzles for full tank agitation.
CONTROLS
Spray pump control switch, agitator jet switch, rate switch, individual boom
On/Off switches, boom actuator switches, indicator lights on pump, agitation
and boom switches, throttle lock.