Use and Care Manual

-8-

The "Continuous Drainage" function can be started with the following steps.

Drain hose

Back of the unit

n c

over

1. T

o save having to periodically empty the bucket,

this unit can be set for continuous drainage. Use

the supplied drain hoseDQGFonnect LW to the

continuous drainage connector located on the

back righthand side of the unit..

2. Unscrew and remove the drain cover found at the

rear of the unit.

3. Remove the soft rubber stopper. Place it in the

bucket

for safe keeping.

5. Insert the drain hose (provided) through the hole

of the drain cover with the washer portion on the

inside of the cover.

6. Connect the drain hose to the drain port.

7. Tighten the drain cover in clockwise direction

onto the rear of the unit.

4. Return the bucket to its proper position.

Drain cover

Soft rubber

stopper

Drain cover

Drain hose

Bucket

CONTINUOUS DRAIN

AGE

Drain

cover