Installation Guide

Cover.ai

Hardwood Deck Tiles

Installation Instructions

SamplePatterns.ai

Pattern ideas

NOTE:

Before installation, plan your design and level the entire surface area.

Cutting around obstructions: It may be necessary to cut the deck tiles to create an even surface around obstructions.

For best results, use a carbide tip saw blade. Be sure to avoid cutting the screws that attach the plastic membrane to the

wood. Screws may have to be repositioned to ensure a secure connection between the plastic membrane and the wood.

Use a high-quality penetrating oil on the cut edges of the wood to prevent the wood from checking and splitting.

Continuted on back side

PAGE 1
Hardwood Deck Tiles Installation Instructions Pattern ideas Cover.ai NOTE: Before installation, plan your design and level the entire surface area. Cutting around obstructions: It may be necessary to cut the deck tiles to create an even surface around obstructions. For best results, use a carbide tip saw blade. Be sure to avoid cutting the screws that attach the plastic membrane to the wood. Screws may have to be repositioned to ensure a secure connection between the plastic membrane and the wood.
PAGE 2
Installation steps 1 2 3 4 Snap-in.ai Mark-Align.ai Sealing Abaco deck tiles: Because of the durability of this hardwood and a pre-applied oil penetrating sealant, it does not require an additional water sealant; however, we do recommend that you use a highquality penetrating oil sealant to maintain its appearance. If not maintained with a sealer, and depending on the use and exposure to the elements, the color will eventually fade to a silver/gray tone.