Installation Instructions

string line
Tools you may need
STEP4
STEP5 STEP6
Attach the 1” x 6” - 8’ horizontal pickets. Starting at the bottom,
1” off the ground. Use 2” premium exterior screws at attachment
locations. Space 3/8” - 1/2” between pickets. Continue placing
the pickets to the top checking spacing and level.
Now it’s time to install the picket support. Attach a 2” x 3” in
the center location between posts. Then screw through the
picket into the 2x3. This will help to add additional stability,
support, and strength to your panel.
Menards offers a variety of accessories for your fence project
including post caps, post tops, and gate hardware. Visit a store
near you, or menards.com for details.
Add 1” x 6” - 12’ board at the location where the pickets
attach to the post to cover the seam. Trim the length of
the 12’ board, as needed. This will help keep a nice clean
look to the fence panel.
Attach Post Cover to the
Post Picket Line
Attach pickets horizontally
across the posts to the top
If desired nish by adding
some fencing accessories
Attach the picket support to
the back of the panel
STEP3
string line
string line
www.menards.com
© April 9th 2020
Material list for 1 panel
Product Size Quantity
1 Treated Post 4” x 4” x 10’ 2
2 Pickets 1“ x 6” x 8’ 12
3 Picket Support 2” x 3” x 8’ 1
4 Post Cover 1” x 6” x 12’ 1
5 Bag of concrete 2
6 Bag of gravel/mix 2
7 Galvanized screws 1 box