Instructions / Assembly

UPPER
HINGE
LOWER
HINGE
FENCE POST
GATE
FENCE
POST
LEAF
GATE
LEAF
ADJUSTMENT PIN
ADJUSTMENT CAM
HORIZONTAL
ADJUSTMENT
NUTS
HORIZONTAL
ADJUSTMENT
ROD
Installation Instructions
FENCE POST
GATE
INSTALLATION, ADJUSTMENT AND MAINTENANCE INSTRUCTIONS
WI-6010-MA-PH
SC Hinge, Multi-Adjust, SS
The hinges should be mounted as shown with the supplied screws.
Pre-drillI the screw holes if the gate or fence post has a metal stiffener or other support. The fence post leaf should be mounted so that
the adjustment cam and the horizontal adjustment rod are located on the outer surface of the fence post and gate when the gate is in
the closed position. The top surface of the upper hinge should be within 6 inches of the top surface of the gate and the lower surface of
the lower hinge should be within 6 inches of the lower surface of the gate. In applications where additional hinges are used, they should
be evenly spaced between the upper hinge and lower hinge.
Pay to mark your property line.
- Being proactive will save you time and money
from any disputes from neighbors.
Gate posts require an internal support system for
weight - bearing purposes and therefore wooden
inserts or a post stiffener is required.
Post Spacing will be determined by gate width and hardware
Screw / Nail Together As Shown
FENCE
POST
Purchased 1X6X8´
Cut To 4-5/8”
3/4” Actual Thickness
Purchased 1X4X8´
Cut To 3-1/8”
FENCE
POST
Purchased Metal Stiffener
X
X
X
½X
½X