Use and Care Manual

Operating Instructions:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds: 0(off) and speedsⅠ, Ⅱ,
Ⅲ is Slow, Middle, Fast.
c) Tilting angles-By pushing the tilt-guard, you can adjust the fan to
any elevation preferred.
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard. If damaged after pro-long use, get it
repaired by any electrical repairman.
f) To clean: Disconnect the power cord from the mains. Remove the
guard and the blades carefully. Do not drop the blades! First use
soft cloth with light soap to clean off oil stains. Then wipe and polish
with dry cloth. Never use polish or any corrosive liquid that will
damage the paint, metal or plastic! Put back the blades and lock
the guard securely before use.
NO exchange will be entertained if the above instructions are not
followed. Always Test the product first before purchase.