SDS
Safety Data Sheet
Material Name: 041 Insulfoam Molded EPS Products
Delayed
Suspected of damaging fertility or the unborn child. May cause harm to breast-fed children.
Section 5 - FIRE FIGHTING MEASURES
Extinguishing Media
Suitable Extinguishing Media
Use carbon dioxide, regular dry chemical, regular foam or water.
Unsuitable Extinguishing Media
None known
Special Hazards Arising from the Chemical
Slight fire hazard. Combustible Dust. Dust/air mixtures may ignite or explode. Avoid generating
dust; fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is
a potential dust explosion hazard.
Hazardous Combustion Products
Oxides of carbon, hydrogen bromide
Advice for firefighters
Wear personal protective clothing and equipment such as self-contained breathing apparatus (SCBA) for
protection against possible exposure.
Fire Fighting Measures
Do not scatter spilled material with high-pressure water streams. Move container from fire area if it
can be done without risk. Dike for later disposal.
Section 6 - ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment and Emergency Procedures
Wear personal protective clothing and equipment, see Section 8.
Methods and Materials for Containment and Cleaning Up
Do not touch or walk through spilled material. Stop leak if possible without personal risk. Prevent
dust cloud. Avoid inhalation of material or combustion by-products. Collect spilled material in
appropriate container for disposal.
Environmental Precautions
Avoid release to the environment. Collect spillage.
Section 7 - HANDLING AND STORAGE
Precautions for Safe Handling
Combustible substance. Minimize dust generation and accumulation. Use methods to minimize
dust. Eliminate all sources of ignition. Routine housekeeping should be instituted to ensure that dusts do
not accumulate on surfaces. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Wash thoroughly after handling. Do not eat, drink or smoke
____________________________________________________________
Page 3 of 10 Issue date: 2015-05-26 Revision 1.0 Print date: 2015-06-17










