User manual

1. Use as directed:
This product serves exclusively lighting purposes and may:
 only be used with a voltage of 230V ~50Hz.
 only be used in dry condition,
 not in damp or dirt-endangered rooms.
 not in areas of high air humidity.
 not be exposed to strong mechanical loads or to strong
contamination.
 only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
 not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
2. Technical Data:
Operating voltage: 230V ~50Hz
Safety class: II
Bulb: 65 x LED, 8W
Dimensions (L/W/H): 33 / 3 / 3 cm
Weight: 0,20 kg
Importeur: SLV Elektronik GmbH
3. Installation
The electric connection may be executed only by an electric expert
who is familiar with the valid directives!
Caution: Switch off the power of the mains supply line or
respectively of the connection lead before doing any works
. Use only
parts, which are supplied with the product or are described as accessories!
Otherwise the product or the installation might not be sufficiently safe.
Installation place:
The product is suited for wall and ceiling installation.
Make sure that the product is mounted on a stable, even and tilt-fixed
background.
Separate Installation Steps
 It is possible to connect several fittings in a row. Up to 10 fittings may
be connected in one row.
 Choose the type of fastening clips serving the desired direction of the
light exit. Mount the fastening clips on the mounting surface. Take the
distance between each clip directly from the fitting.
 Attach the fitting on the fastening clips.
 Close any open socket with the supplied cover.
 Use the supplied connection cord to connect the fitting with the public
mains.
 Ensure that the light fixture holds securely!
 The product is now ready for operation.
4. Operation
:
Information for the user:
Operate the product only if it is working correctly. Switch off the product
with a malfunction immediately and operate it again only after examination
by an electrical specialist. This is the case, when:
 visible damages appear.
 the product does not work.
 smoke, steam or crackling sounds appear.
 an overheating is recognisable.
Repairs of the product or work on mains voltage-prominent sections may
only be carried out by qualified electricians.
Warning: Here exists mortal danger from an electric shock!
How to avoid failure and fire risk:
 Do not cover the product - provide free air circulation!
 Do not hang or fasten anything on the product, especially no decoration.
Never let children play unsupervised with electric products! Children
can not always estimate dangers in dealing with electric energy correctly.
What is to do if a bulb is defect or does not work?
 Under regular usage the LED bulb has an extraordinary long lifetime. If
nevertheless damage or failure occurs, contact your local dealer to
exchange the LED bulb.
5. What else has to be considered?
Disconnect the product from power, before you…
 clean or maintain the product.
 do any works on the product or its components (electric expert).
Art.-Nr. 160311 06/2007 © by SLV Elektronik GmbH
Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany
Technical Details are subject to change. Duplication prohibited !
ENGLISH
Instruction Manual
for LED fitting
160311
Please read carefully and keep for further reference !