Instructions / Assembly

Make sure all parts are connected and locked into position.
Your Armchair is ready for use.
This Armchair can only be used on a flat, level surface.
Install the first Front Leg(B) into the bottom of the Chair(A) by placing one
Gasket(①) onto the threaded stem.
Insert the threaded stem of the Front Leg(B) into the front mounting position
of the Chair(A) then tighten by turning the leg clockwise until the leg is
completely secure.
Repeat this process with the remaining three Legs.
Note: The use of the Gaskets are OPTIONAL and are especially useful
to help alleviate slight wobbles. Some Legs may need more than one
whilst some Legs may not need any.
With assistance from your adult partners, position the Chair(A) on it's back
on a clean, non-marring surface, as shown.
Unzip the pouch and remove the four Legs and Hardware.
Close the pouch before assembling.
Step 2
Step 3
Hind Leg(C)
Front Leg(B)
Use Gasket(①) to
achieve stability
Front
Leg(B)
Chair(A)
Page 4 OF 5