Use and Care Manual

ManualsBrandsUnbranded ManualsConcrete Coatings1 Qt. Concentrated Black Water Based Concrete Stain

Technical Data Sheet

ULTRAVIOLET (UV) EXPOSURE AND WEATHERING

150 0

PRODUCT DATA

Sections

HIGH PERFORMANCE, WATER BASED PENETRATING

CONCRETE STAIN AND COLORANT THAT IS A SAFER

ALTERNATIVE TO ACID BASED STAINS.

HYDRO-STAIN™ 1500

09 93 00

Concrete Staining

A high performance

nanotechnology driven water

based concrete stain system.

This unique formula is a safe

alternative to acid based stains

containing no hazardous

components while producing

the same mottled look as acid

stains when used to decorate

concrete.

There is no neutralizing or

rinsing required when using the

Hydro-Stain 1500.

This product can be used on

overlay systems, concrete or

decorative concrete.

Available colors!

Seal gray, accent black, amber,

rust, mahogany, molasses

Coverage!

Up to 300 ft²/gallon

KreteTek Industries Inc. 66 River Road Hudson, NH 03051 // 855-573-8383 // www.ghostshield.com

Percentage Improvement vs. Control

HYDRO-STAIN™

15 0 0

Solid Color

Concrete

Stain

Semi-

Transparent

Stain

Leading brand

Water Based

Stain

34%

45%

51%

Description

Colors by

27%

Summary of content (4 pages)

PAGE 1
500 PRODUCT DATA Colors by Technical Data Sheet Sections 93 00 09 09 Concrete Staining HYDRO-STAIN™ 1500 HIGH PERFORMANCE, WATER BASED PENETRATING CONCRETE STAIN AND COLORANT THAT IS A SAFER ALTERNATIVE TO ACID BASED STAINS. Description ULTRAVIOLET (UV) EXPOSURE AND WEATHERING A high performance nanotechnology driven water based concrete stain system.
PAGE 2
1500 PRODUCT DATA Colors by Technical Data Sheet Sections 93 00 Concrete Staining 09 09 TECHNOLOGY // ADVANTAGES • Composition - High performance water based penetrating concrete stain TYPICAL PROPERTIES • Water based safer alternative to acid based stains containing no hazardous components Appearance - Colored liquid • No rinsing or neutralizing required when using the Hydro-Stain 1500 Packaging - 1 quart (946 mL) • Durable weather and UV resistant can be used on interior and exterior applicatio
PAGE 3
1500 PRODUCT DATA Colors by Technical Data Sheet Sections 93 00 Concrete Staining 09 09 APPLICATION Surface Prep 1. New “green” concrete must be properly cured. Concrete should obtain 80% of design strength, typically achieved within 14-28 days. 2. The concrete substrate must be structurally sound and clean of oil, grease, dirt, wax, curing compounds, efflorescence, paints, previous sealers and stains, adhesives and other contaminants.
PAGE 4
1500 Colors by Technical Data Sheet Sections PRODUCT DATA 93 00 Concrete Staining 09 09 APPLICATION Warranty Application Notes • • Proper application is the responsibility of the user. Make sure the most current versions of technical data sheets and safety data sheets are being used. When using more than one color, apply lighter colors first. Colors can be mixed before application, or they can be applied on top of one another to achieve a more distinct color.