Use and Care Manual

Ridgeline Ridge Vent.
The ideal product for improved air flow
throughout the attic area. And that helps
eliminate moisture, reduces energy costs
and increases roof life. What’s more, the
Ridgeline vent is practically invisible
once installed.
Ridge Caps.
Now available in two widths. New
Narrow Ridge Caps, ideal for residential
use, measure 79" long x 12 1/2" wide.
For farm or commercial use, wider
Ondura ridge caps measure 79" long x
19" wide. Both widths are made from
the same material as Ondura sheets
and cover 6 feet of ridge or hip with
a 7" overlap. Lightweight and easy to
install. Use narrow ridge caps with the
Ridgeline Ridge Vents or use alone.
Also available in Ridgetile.
Closure Strips.
Now available in two styles: Ventilated or
Regular. Use Ventilated Closure Strips in
conjunction with Ridgeline Ridge Vents for
an improved ventilating system or in areas
where additional ventilation is desired.
Regular Closure Strips should be used
whenever a water-tight seal is necessary.
Each closure strip comes 44" long.
Pipe Flashings And Boots.
Ondura’s two pipe flashing accessories
install easily with an Ondura pipe boot.
The accessories have large center areas
which accept a wide range of pipe sizes.
May be used for
hot or cold pipes.
Available in two
sizes. Small size
measures
20" W. x 26" H.,
12" x 12" flat center. Large size measures
28" W. x 34" H., 20" x 20" flat center
Skylights.
Translucent
fiberglass skylight
panels, 48" x 79",
let light in and
keeps glare out
for pleasant, bright
working conditions.
Ondura skylights
are energy savers,
too, since they
provide natural
light. And having the same configuration
as the Ondura sheets, they are easy to
install. Not for Residential Use.
Specifications
and Accessories
Colors:
7
®
Sheet Specifications
Size: 48" X 79" each
Weight: 18 lbs.
Sheets per covered square: 4.5
Tile Specifications
Size: 48" x 19 3/4" each
Weight: 4.5 lbs.
Tiles per covered square: 24
Special Order sheets of Ondura are available
with a Class-C fire rating and Ondura can
be manufactured in virtually any color you
desire. Minimum quantities may apply.
Washered
Nails.
They’re painted
galvanized, ring-
shanked, and
come with a large
EPDM rubber washer
assembled. 3" standard length.
4" length is available for use over
rigid insulation. In high corrosion
conditions near salt water or in
fertilizer applications, stainless
steel nails are required.
Gray Black White Green
Blue Red Brown Tan
* No statement in this literature should be construed as a warranty claim. The warranty
is packaged with the Ondura product. If you did not receive a copy of the warranty at
time of purchase, you must contact the customer service department by Phone,
Fax, Email, or Mail and a copy will be sent to you.