Instructions / Assembly

B. Installing the Battery in the Transmitter

1. Remove the battery compartment cover on the bottom of the transmitter.

2. Insert 2 AAA batteries as indicated and replace the battery cover

3. Switch the power switch on the bottom of the transmitter to ON.

4.OncethetransmitteristurnedonaredLEDlightwillashonthetransmitter3

times and the current temperature will be displayed on the monitor.

NOTE: If the probe is not connected to the transmitter the current temperature will

display as “LLL”.

IMPORTANT: The transmitter will transmit the temperature every 30 seconds if the

temperature does not change. Once the temperature changes the

transmitter will update automatically.

C. Meat Selection

To select the type of meat you want to cook, press the

MEAT button. The monitor

displays the type of meat the thermometer is ready to measure. Each press will

change the display in the following sequence:

D. Taste Selection

To select the taste level of the meat you want to cook, press the

TASTE button. The

dierenttasteoptionsare:

WELL / M WELL / MEDIUM / M RARE / RARE

The corresponding preset temperature will show on the monitor as “Target Temp”.

E. Manually Setting Target Temperature

1. Press and hold the

MODEbuttonfor3seconds,“TargetTemp”willstarttoash.

2. Press

MIN or SEC buttons to select the desired temperature.

3. Press the

MODEbuttontoconrmyoursetting.

NOTE: Once the desired temperature is reached the monitor will start to beep and the

“Current Temp” will begin to blink.

BEEF LAMB VEAL HAMBURGER

PORK TURKEY CHICKEN FISH