Use and Care Guide

4
INSTALLATION INSTRUCTIONS
1. Place T
op (B) and Backsplash (C) face down
onto a scratch free surface such as a
foam sheet that came in the packaging.
2. Apply silicone adhesive (not included) to
the top edge of Sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top. Make sure the sink
over-flow hole is facing the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Note: To install the sink onto top correctly,
ensure the two “Back” stamps on the sink and
on the sub-top frame are on the same side,
and also make sure that the lines marked on
the sink and on the sub-top frame line up.
1
Foam
Sheet
Foam
Sheet
1
2
MDF
B
C
BACK
Foam
Sheet
2
2
1
D
B
BACK
BACK
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for adhesive to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, adhesive,
power drill with drill bit, measuring tape, level
C