Installation Guide

PERFECT FOR: Planters • Tiered Walls • Small/Medium Walls

The Keystone Insignia Wall and Cap System successfully

blends rustic and modern aesthetics for an attractive

contemporary look. The Insignia Wall unit is open-cored,

making it lightweight and easy to handle. Insignia Wall units

use the latest in modular pin connection technology; making

them easy to install and adding strength to your project.

The Keystone Insignia Cap is double-sided, which allows

you to create a seamless and attractive ﬁnish to your Insignia

Wall, or project. The Insignia Cap also has the versatility to

be used for a small border wall to approximately 1’ height,

no alignment pins required.

Wall

Height

Wall Length (measured at face)

5' 10' 15' 20' 25' 30'

1 course - 4" 5 10 15 20 25 30

2 courses - 8" 10 20 30 40 50 60

3 courses - 12" 15 30 45 60 75 90

4 courses - 16" 20 40 60 80 100 120

5 courses - 20" 25 50 75 100 125 150

6 courses - 24" 30 60 90 120 150 180

Cap course - 2.5” 5 10 15 20 25 30

Estimate the number of Insignia Wall & Cap units you will need.

PATIO STONE PATIO STONE

WALL

SERIES

WALL PATIO EDGER

SERIES

CAP WALL

COLLECTION

WALL PATIO EDGER

12 in W

4 in H

7 in D

2.5 in H

12 in W

* Please Note: Maximum wall

height not to exceed 2'. This chart

is based on site conditions which

include a level grade, granular soil

and no surcharge.

Don’t forget.

Keystone Landscape Pins

PAGE 1
PATIO STONE WALL Perfect for: Planters • Tiered Walls • Small/Medium Walls The Keystone Insignia Wall and Cap System successfully blends rustic and modern aesthetics for an attractive contemporary look. The Insignia Wall unit is open-cored, making it lightweight and easy to handle. Insignia Wall units use the latest in modular pin connection technology; making them easy to install and adding strength to your project.
PAGE 2
WALL WALL INSTALLATION GUIDELINES SERIES Step 2: Set Base Course through and remove any sod, roots or large rocks. An optional leveling pad of sand or crushed stone can be installed to help make leveling the base course of units easier. Dig the trench a minimum of 6” when installing a leveling pad. Compact and level the soil to receive the first course of Insignia Wall. If your wall contains both WALLand curved areas, start straight with the straight area and build into curves.