Data Sheet

2
Rev. 2/21
Groundsmaster
®
1200 Specifications
*
The Groundsmaster 1200 is manufactured
in Tomah, WI ISO 9002 Certified Plant.
GROUNDSMASTER 1200 - MODEL 31905
WIDTH OF CUT
Overall: 144" (365 cm), Individual deck: 54" (137 cm), Overlap: 9" (23 cm)
MOWING RATE**
Mows up to 8.7 acres/h (3.5 hectares/h) at consistent 6 mph (9.7 km/h)
CONSTRUCTION
10-gauge high strength steel constructed deck with 7-gauge bolt-in reinforcements. 7-gauge welded steel side skids with 5" (12.7 cm) diameter steel rollers.
DECK DRIVE
PTO drive-shaft drives 4-way gearbox, secondary drive-shafts drive individual deck gearboxes, spindles belt driven with spring tensioner pulley. Main drive-shaft fits
standard 1-3/8" (3.5 cm), 6-spline tractor PTO and contains 80 deg CV joint. Deck gearbox contains over-running clutch.
HEIGHT OF CUT
0.5" to 4.0" (1.3 cm to 10.2 cm) infinitely variable
SPINDLES
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm) diameter conical ductile iron housing and two greaseable tapered roller bearings. Driven counter-clockwise
when viewed from the top.
BLADES
9 blades, 19" (48.3 cm) long, 2.5" (6.4 cm) wide, 0.25" (6.4 mm) thick
GROUND FOLLOWING
9 anti-scalp cups, one on each blade, two anti-scalp/striping rollers on each deck. On each deck: two 5" (12.7 cm) diameter roller
WING PROTECTION
Bi-directional, impact absorption damper on each wing deck
OVERALL DIMENSIONS
Transport Height: 75.75" (192.4 cm) Transport Length: 145.5" (369.6 cm) (Hitch fully extended) Width: (decks down):149.8" (380.5 cm)
Transport Width: 86" (218.4 cm) at 1/2" (1.27 cm) HOC
POWER REQUIREMENTS
Minimum 35 HP (26.1 kW) at the PTO, 540 RPM
BLADE TIP SPEED
15,000 ± 300 ft/min (4572 ± 91.4 m/min) at 540 PTO RPM
TIRES
20 X 10 - 10 6-ply K500 turf tread
WEIGHTS
Total weight = 2,984 lbs (1354 kg), Tongue Weight in Transport = 691 lbs (313 kg)
ACCESSORIES
Roller scraper kit, standard blade kit, high-lift blade kit, safety chain kit, Atomic blade kit, tow chain kit, fender kit, SMV Kit, tail light kit, blade cover kit, clevis hitch,
pintle eye hitch
WARRANTY
Two-year limited warranty. Refer to the Operator’s Manual for further details.
CERTIFICATION
Complies with American National Standards Institute (ANSI B71.4-2012)
*Specifications and design subject to change without notice.
**Assumes max mow speed and 100% efficiency. Actual mowing rates may vary depending on operator and conditions.