TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD TECHNICAL SPECIFICATION FOR CARBON ZINC BATTERY TYPE: R03(PVC) Document No. TMMQ/GPTD-BPS230 Effective date Version A03 Pages Prepared by 2021-11-04 Total 7 pages Approved by DONGGUAN TIANQIU ENTERPRISE CO., LTD ADD: TianQiu Industrial Park, Xinji Industrial Zone, Machong Town, Dongguan, GuangDong, P.R.China (Tel)：020-36322277 (Fax)：020-36323339 (P.C)：510410 (Website)：http://www.tmmq.cn (Email)：office@tmmq.
TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD 1. Scope This specification is applicable to the CARBON ZINC BATTERY R03 supplied by DONGGUAN TIANQIU ENTERPRISE CO., LTD. 2. Designations 2.1Defining At the temperature of 20±2℃, the humility of 60±15%，loading at 75Ω discharge,4 hour per day, till the voltage down to 0.9V 3. Dimensions Symbols A B C E F G Ø Specification（mm） Maximun Minimun 44.5 43.3 43.3 4.3 0.5 3.8 0.8 10.5 9.
TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD Dimensions maximum height:44.5mm Maximum diameter: Φ10.5mm Approximate weight 7.75±0.35g 5. Performance 5.1 Test conditions Unless otherwise specified, the test conditions shall be, as a general rule, at the temperature of 22±2℃ and the relative humidity of 60±15%. 5.2 Electrical characteristics NO. 5.2.1 5.2.2 Item storage characteristics Service output Test condition Sampling plan：MIL-STD-105E, General Inspection Lever Ⅱ, Single Sampling, AQL=0.
TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD 6. Packing and Marking Any specific design and packing requirements will be accommodated as required. But as a general, the following markings will be printed, stamped or impressed on the body of the battery: 1）Designation: R03. 2）Manufacturer’s logo “ ” and/or its name “TIANQIU”. 3）Polarity Marking:” + “and /or “-". 4）Caution: DO NOT RECHARGE, IMPROPERLY INSERT OR DISPOSE OF IN FIRE.
TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD 7. Caution for Use 1) Since the battery is not designed to be charged, there are risks of electrolyte leakage or causing damage to the device if the battery is charged. 2) The battery shall be installed with its “+” and “-” polarity in correct position, otherwise may cause the battery to be charged or over-discharged. 3) Short-circuiting, heating, disposing of in fire and disassembling the battery are prohibited.
TQ-R03(PVC) DONGGUAN TIANQIU ENTERPRISE CO., LTD 9. Discharge Curves Discharge method: 75Ω, 4 hour/day EV=0.9V Temperature: 20±2℃ Discharge method: 3.9Ω, 24 hour/day EV=0.
