Installation Guide

R I C H F O R M
T I T A N I U M
Phenolic Film Faced PlyForm
hdo concrete Form/certiFied Film Face
Our plyform is specically engineered to conform with our titanium strength requirements.
We use an A–grade core, with whole piece multi-ply construction to ensure our product will
hold up to demanding conditions, and will withstand multiple pours.
4050 INNSLAKE DRIVE | STE 100 | GLEN ALLEN, VA 23220 | www.rifp.com
Phone: [phone] | [phone] | Fax: [phone] | E-mail: [e-mail] | [e-mail]
DESCRIPTION SIZE
HARDWOOD
CORE
FACE & BACK
HDO Phenolic
Film Plyform
4x8, 4x10, 4x12,
5x12, 6x10, etc.
Hardwood, Combi,
Birch, Euca, Pine
Good Two Sides
GRADE &
CERTIFICATION
GLUE THICKNESS APPLICATION
A/A Grade
ISPM15 & ROHS
Compliant
EXTERIOR
12mm, 15mm,18mm,
21mm, 25mm, etc.
Concrete Formwork
Concrete Shuttering
Phenolic Film Face:
Black
Phenolic Type:
240g/m2
Moisture:
8-12%
Edge Sealed:
Waterproof Royal Blue Paint
Plies:
3/4” = 11Ply
icknesses:
12, 15, 18, 21, 25mm
Tolerance:
+/-0.3mm
PHENOLIC FILM
FACE PLYFORM
is product is smooth on both sides
oering slick faces that show little or
no transfer in concrete formwork.
Richform Titanium is engineered
for concrete formwork, where a
better nish, and a higher number of
re-uses is required.
• Delamination-Free
• #1 Engineered Core
• Solid Exterior Glue Line
STRENGTH YOU CAN TRUST