Instructions / Assembly

STEP 3: _________________________________________________________________________________________

Move to the front post and continue the process. Complete

for all five Hex Head Screws. Fig. 12

Fig. 12

STEP 4:____________________________________________________ _____________ _______________________

Rotate the upper side spindle in Rocker Side D-L until the

pre-drilled hole is at a 45 degree angle. Start the Seat Screw

into the pre-drilled hole and align with the pre-drilled hole in

the bottom of the seat. Repeat for the other three Screws.

Do not fully tighten until all four have been started. Fig. 13

Fig.13