Instructions / Assembly

STEP 1: __________________________________________ ______________________________________________

Place right side of rocker D-R on cardboard shipping box with mortised Pick up Chair Back A and insert in the mortises in the .

holes facing up. Insert the front spindles C-2 into the pre-drilled hole in Chair side D-R. Note: leave top mortise open for Headrest F

the front post. Note: these are marked and place the two larger spindles in a later step. Fig. 2

in the bottom. Tap in with hammer. Fig. 1

Fig. 1 Fig. 2

STEP 1:____________________________________________________ ____________________________________

Place Back Spindles C-1 into Rocker Side D-R mortises and tap in Place Headrest F in the top mortise on the Chair side D-R. Tap in

with hammer. NOTE: These are marked and the large spindle goes with hammer until fully seated. Fig. 4

in the bottom. Fig. 3

Fig. 3 Fig. 4