Item #1001 025 205 Model #L-GZ916PST-D USE AND CARE GUIDE L-GZ916PST-D TIERNEY GAZEBO Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase. Our clear, easy o follow, step by step instructions will guide you through the project from start to finish. Please do not return this product to the store. For technical assistance or replacement parts, please call Sunjoy Group at 1 (866) 578-6569 anytime.
Table of Contents Table of Contents .......................................................... 2 Safety Information......................................................... 2 Warranty ......................................................................... 2 What is Covered .......................................................................2 What is Not Covered ................................................................2 Pre-Assembly ...............................................................
Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS \ A M B1 N B2 P C Q E R S F T G U H J V L K 4
Pre-Assembly (continued) Part Description Quantity A P11109A01106 Post 4 B1 P11019A01106 Long screen 4 B2 P11020A01106 Short screen 4 C P10803A01106 Connector of middle bottom beam 4 E P10208A01106 Cant beam 4 F P10409A01106 Middle beam 4 G P10207A01106 Cant beam bottom tube 4 H P10410A01106 Middle beam bottom tube 4 J P10113A01106 Connector for the large top 1 K P10206A01106 Cant beam of small top 4 L P10112A01106 Connector of the small top 1 M P11606A01106
Assembly 1 2 NOTE: To avoid destroying the finish, do not put the parts on the ground directly. parts on the ground directly. Insert the long screen end (B1) into the short screen (B2), fasten Set stake cover (N) into the post (A), then installed stake plate by using Bolt ((CC), washer (BB) and Nut (DD). (M) on the bottom post (A) by using bolts (AA), washer (BB).
Assembly (continued) 5 6 NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Attached the cant support (P) to the long and short screen NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Insert cant beam end (E) into Cant beam bottom tube (G), then insert the cant beam other end (E) into big top connector (J), attached the (B1/B2), by using bolt (CC) and washer (BB).
Assembly (continued) 9 10 NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Fix the small canopy (R) to the small top cant beam NOTE: To avoid destroying the finish, do not put the parts on the ground directly.
Care and Cleaning □ Before using, clean the gazebo completely with a soft dry towel. □ Do not put your gazebo in wet conditions where there is a risk of rust developing. □ When not in use, store in a cool, dry area. □ Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that protects it from rusting. However, due to the nature of iron, surface oxidation (rust) will occur once these protective coatings are scratched.
