Use and Care Manual
Precut Value Shed Manual 
Workshop & Gable
Construction Manual © 2008-2009 Little Cottage Co. Page 3
13
14
15 16
17
18
Next make sure top is ush with 2x4 and fasten 
with 2” nails. 
Make sure outside corner is ush as shown before 
fastening. 
Continue with Smartside siding installation.
Fasten header piece with 2” nails as shown in 
picture before. 
Next install door stops as shown. Keep ush 
with the top of 2x4 not Smartside and secure with 
2” nails. 
Install the trim block in the center of the header 
and secure with 2” nails. 










