SDS

Further information

HMIS® is a registered trade and service mark of the NPCA.

E - Safety Glasses, Gloves, Dust Respirator

PERCENTAGE OF HAZARDOUS INGREDIENTS COMPONENT %:

0.25 pcf

Arsenic Pentoxide 0.3%, Copper Oxide 0.15%, Chromium Trioxide 0.4%, Wood Dust* 84.28%

0.4 pcf

Arsenic Pentoxide 0.4%, Copper Oxide 0.2%, Chromium Trioxide 0.6%, Wood Dust* 83.98%

0.6 pcf

Arsenic Pentoxide 0.6%, Copper Oxide 0.3%, Chromium Trioxide 0.9%, Wood Dust* 83.47%

1.0 pcf

Arsenic Pentoxide 1.0%, Copper Oxide 0.6%, Chromium Trioxide 1.4%, Wood Dust* 82.45%

2.5 pcf

Arsenic Pentoxide 2.6%, Copper Oxide 1.3%, Chromium Trioxide 3.3%, Wood Dust* 78.88%

* This represents the maximum amount of wood dust that could be generated if the wood was

completely machined.

The above percentages are based on the applicable retention, a wood density of 32 pcf., and a

moisture contact of 15%, the above values may vary due to the variability of treatment and the

natural variability of wood.

HMIS® ratings

Health: 1*

Flammability: 1

Physical hazard: 0

Personal protection: E

NFPA ratings

Disclaimer

Koppers Performance Chemicals Inc. cannot anticipate all conditions under which this information

and its product, or the products of other manufacturers in combination with its product, may be

used. It is the user’s responsibility to ensure safe conditions for handling, storage and disposal of

the product, and to assume liability for loss, injury, damage or expense due to improper use. The

information in the sheet was written based on the best knowledge and experience currently

available.

SDS USCCA Treated Wood

9 / 9